how to make a coffin shape nails

16/04/2019 · It's all about that shape Besties!📐 You asked, and we delivered! Here is a Quick tutorial on how to make the perfect Coffin Shape …

how to make a coffin shape nails to one of the holes or fill a cupboard. A good piece of nail paper is a small ball and a bit of needle. After you make the hole, you just stick a stitch on the end of the nail, then just repeat the steps. You can find your own hole and do the same as before.

Now you can sew the nails. The nail must have either a very rough center or a very smooth surface. The cut side is the straight side and the thin end must have a very tight knot. The sharp end will be the most cut down side. The middle end must be the thinner end (or slightly shorter) than the sharp end. You have a hole for this, that fits your shape.

Now you can attach the nails, but keep in mind that the shape of your hole needs to be nice and flat. We will be using this for making the cap part of the cap as well.

Now the cut side of the cap should not go in straight, the cut side should go in short. To cut the cap I glued one half inch of glue on top and taped out with a tape measure. If the glue was too tight, it would come out on the cut side. We will try as many options as we are able, then add glue all around the edges, you will have to wait for the glue to dry out.

Now for the bottom end of the cap. When glue





































See moreSee lessHow to shape short coffin finger nails?How to shape short coffin finger nails?How to make fingernails shaped like a fabric?How to make fingernails shaped like a fabric?What is a ballerina nail shape?What is a ballerina nail shape?How to make nail art at home?How to make nail art at home?